Puff Heat Transfer Vinyl material that expands when heated to 

create an exciting three-dimensional puff look on fabric! 

We have a variety of Puff Basic and Neon colors to choose from!

Watch our video below on How to Apply Puff Heat Transfer Vinyl:‍

‍PUFF HTV INSTRUCTIONS:‍

***Download a Printable Guide Below! ‍

‍

Cutting material:

• It’s recommended to use a 45° blade, at 90 gf pressure, 20cm/sec speed
• Make sure to mirror cut your design

Weed material:

• Carefully weed out any excess material from your cut design
• Place your material on the garment with it’s polyester carrier

Heat Press Instructions:

• DO NOT USE A HOME IRON
• Preheat the lower plate of the heat press for 20 seconds
• Preheat your garment for 3 seconds to remove any moisture, wrinkles, or creases
• Press your material to 375° for 12-15 seconds
• Peel off the liner when it’s still hot

***Washing Guide

• Recommended washer temperature should be 104°F/40°C
• Wait 24 hours before washing your material
• DO NOT use bleach, DO NOT dry clean material
• Can be tumbled dry on a synthetic cycle

‍‍

Download Printable Guide‍

***NOTE: Our printable guide says heat press for 20 seconds. All heat presses perform differently, we recommend to test vinyl around 12-20 seconds before putting on your garment