JetPro Active Wear Heat Transfer Paper is designed for full color image and photo transfers using an inkjet printer.

This product is specifically formulated for synthetic fabrics that will be stretched.

Achieve a durable product with superior wash fastness and almost no hand (a smooth finish that feels nearly identical to the fabric underneath)

Temperature:

350°F - 375°F

Time:

20 - 30 seconds

Pressure:

Heavy

Peel:

Hot / Immediately

Printing Instructions

We recommend printing through an inkjet printer with pigment inks, such as the Epson WorkForce series.

Print design on the blank side of the paper in REVERSE or in other words, flip it horizontally. This can be done within the design program or printer’s settings (see your printer manual for more information). Use standard printing settings for plain paper, and at a medium image quality level. Single-sheet feeding is recommended.

For best quality results, JetPro SofStretch can be trimmed with a vinyl cutter to offer a lighter, softer feel on the garment.

Application Instructions

Heat Press is REQUIRED. This paper is NOT compatible with a home iron.

1. Prepare heat press at 350-375 degrees F.
2. Place heat transfer paper with the image facing down in the desired position on fabric.
3. Using the above-recommended temperature, apply firm pressure for 20-30 seconds.
4. Hot peel the transfer immediately after pressing. Caution: transfer will be hot!

• This product may also be cold peeled, but elasticity and durability decrease. For best results, lightly stretch transferred area immediately after peeling.

1. Re-press transfer with a silicone sheet for 20 seconds for best durability.