DinoPUFF - Basic

Thank you! Your submission has been received!

Oops! Something went wrong while submitting the form.

DinoPuff Basic is an exciting New Concept in HTV!

It's an expanding, polyurthene based foaming vinyl. Prior to the transfer process it looks like regular heat transfer vinyl. During the transfer process its specialty unfolds. IT EXPANDS and results in a very special Puffy surface effect. There is slight pulling up of the fabric that increases the puffy look and feel of the finished design. It is suitable for cotton, polyester, and blended textiles. DO NOT use on nylon or other coated textiles. For best results a heat press must be used. Peel Hot. Sold in 20" roll widths.

*Note: DinoPUFF Royal looks purple before it's applied but puffs up Royal Blue.

‍

20 inch

pricing

1 yd roll

15.00

5 yd roll

60.00

10 yd roll

110.00

25 yd roll

50 yd roll

54 yd roll

12 inch sheet

20 inch

12 inch sheet

1-4 sheets

per sheet

5-14 sheets

per sheet

15-29 sheets

per sheet

30-74 sheets

per sheet

75-149 sheets

per sheet

150+ sheets

per sheet

‍Application Instructions:

Preheat garment at a temperature of 300°F for 4 seconds to remove moisture and wrinkles.
Apply vinyl to substrate for 10-20 seconds at 284°F-320°F temperature using medium pressure.
Peel HOT ONLY.
Please Note: This product WILL NOT work with a household iron. Cricket presses and home irons are not recommended as temperature and pressure are very important for optimal puff result. A clamshell heat press is needed to apply this product.

※ THIS PRODUCT IS SENSITIVE TO PRESSURE & TEMPERATURE APPLIED. HIGHLY RECOMMENDED TO TRY AT VARIOUS SETTINGS TO FIND OPTIMAL RESULT.

Washing Instructions: